Park Tool CC-2 - Chain Wear Indicator

• An accurate way to check for wear of roller and pin on chains
• 1% of wear is enough to affect chainrings and sprockets, and allow shifting performance to deteriorate
• Just insert the chain Checker's pins into two links, press the swing arm gauge, and then check the gauge window for an accurate reading
• Reads wear from 0.25% to 1%
• Made in the USA and covered by Park Tool's legendary limited lifetime warranty

A worn bicycle chain can cause poor shifting and in time can even cause excessive wear to the derailleur and rear cogs, causing a much more expensive problem. That's why bike component manufacturers recommend chain replacement at regular wear intervals. Now you can quickly and accurately determine the wear (or "stretch") of nearly any bike chain with the CC-2 Chain Checker.

Simply insert the Chain Checker’s pins into two links, lightly press the swing arm gauge, and then check the gauge window for an accurate reading. The CC-2 is compatible with most single-speed and derailleur chains*, including Shimano® XTR® 12-speed chains.

• 5-to-10 speed chains: replace chain at or just before 0.75%
• 11-to-12 speed chains*: replace at or just before 0.5%
• Single-speed chains: replace at or just before 1%
• Check with manufacturer for specific replacement instructions

*Use the CC-4 for SRAM® Flattop™ and SRAM® T-Type 12-speed chains.