Slime Bike Tube Sealant 8oz

The Slime Bike Tube Sealant is suitable for all types of inner tubes, this easy to use product can prevent and repair punctures of up to 3mm using Fibro-Seal technology. This high quality sealant is also non-toxic and environmentally friendly and once installed into the inner tube the slime remains liquid which will not harden or dry out. Overall this product is a fantastic solution for those annoying flat tyres!

• 8oz bottle
• Prevents punctures up to 3mm deep
• One bottle fills two standard mountain bike inner tubes
• Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble
• Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves Slime for tube type tyres is NOT recommended for use in tubeless tyres
• Remains liquid inside the tyre, coating the tread area as the tyre rotates

• For use in inner tubes
• Compatible with inner tubes with removable valve cores

• Unscrew the white cap from the top of the bottle, peel off the white seal and then re-attach the white cap
• Remove the clear tube from the side of the bottle and attach one side to the top of the white bottle cap Attach the other side to the valve stem on the tyre
• Squeeze in an appropriate amount of Slime, you can use the chart on the back of your bottle to determine how much Slime you need
• In general, bike tyres need 4 oz of sealant each If you are using the gallon product of Slime, then one pump equals approximately 1 oz of Slime
• Reinstall the valve core and add air
• To properly spread the sealant around the inside of your tyre, spin the tyre quickly a few times