Muc-Off Tubeless Valves 44mm Black

• Lightweight, yet strong 6061 machined aluminium construction.
• Works with the majority of tubeless rims.
• 6061 Aluminium machined valve caps.
• 4mm machined Allen Key slot for easy installation/removal.
• Premium anodised black finish looks great on any bike!
• 44mm valve length will work with most rim depths. 
• Removable valve core for easier sealant installation which allows sealant to be injected straight into the tyre whilst fully seated.

Compatible with most tubeless ready wheels and tyres, these valves are the ultimate companion for keeping your rims looking fresh.   

We know how frustrating it is to have a leaky tubeless valve that just doesn’t seal! So we set about designing and making our own premium tubeless valves to solve the hassle of finding your tyre flat every time you go to ride.

For too long riders have had to settle for tubeless valves that are functional without being beautiful, but we have raced to the rescue to perfectly match form with function.

WHATS INCLUDED?

• 2x 6061 Aluminium Presta valves
• 2x Aluminium Valve caps
• 2x Aluminium Locking nuts

FITTING INSTRUCTIONS:

1. Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
2. Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
3. Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal.
4. TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
5. Removal the valve core and fill with no puncture hassle tubeless sealant and inflate! Job Done.